Products Page

Starter Pack

New to Thermoplastics? Enjoy a Starter Pack!
The starter pack consists of three large 11″ x 14″ sample cuts.
Fosshape 300, Fosshape 600 and Wonderflex materials.
Also included for free is  3″ x 5″ samples of Fosshape 400 and Wonderflex Pro.

    • Cost: $21.99
    • Free shipping in the USA only
Quantity

Price: $21.99

Loading Updating cart…

WONDERFLEX® PRO

Is a heat activated composite material, which contains its own adhesive.  Wonderflex Pro does not contain the  scrim-reinforcement of Wonderflex, so it will have more stretch and can take more complex curves and more intricate details. Wonderflex Pro has an extremely smooth surface, with one side glossy. Easily painted or decorated with a variety of artisan coatings, gessos, bondo and paints. It has superior strength and flexibility, yet is remarkably lightweight. You’ll find it fabulous for headpieces, sub-structures, ornamental effects, masks, props, scenic materials and a whole lot more.

Because it’s so tough and can be molded into any shape or thickness, it’s even ideal for making quick repairs or modifications. A steamer, hot air gun or simply hot water may be used for activation. With a low activation temperature of 150°-170° F (70° – 80° C, Wonderflex Pro® has a long open time and can be hand-worked or laid up for two or three minutes.  Just reheat repeatedly as required for additional forming. It works beautifully with or without molds and cuts with a utility knife or scissors. It bonds to itself  well and can be adhered to most porous materials like paper, wood, fabric, foams and Fosshape®.

  • Standard 1 mm thickness (.039″)
  • Very smooth texture for high gloss finish
  • $74.99 per sheet 43″ (109 cm) x 55″ (140 cm) sheet size
Quantity

Price: $74.99

Loading Updating cart…

WONDERFLEX® PRO 1/2 sheet

Wonderflex Pro now available in 27 1/2″ x 43″ When activated by heat Wonderflex Pro can be pushed into silicone molds to take on intricate details. No time wasted on waiting for it to dry or cure. Once the Wonderflex Pro is cool it is ready to be removed from the mold.

Quantity

Price: $44.99

Loading Updating cart…

WONDERFLEX®

051

This heat activated composite material, which contains it’s own adhesive, is often referred to as the “Celastic” replacement product. This pliable, scrim-reinforced extruded composite is a revolutionary new material, with a smooth surface on one side that can be molded or formed once it’s been heated.  Easily painted or decorated with a variety of artisan coatings, gessos, bondo and paints.  It has superior strength and flexibility, yet is remarkably lightweight. You’ll find it fabulous for headpieces, sub-structures, ornamental effects, masks, props, scenic materials and a whole lot more.

Because it’s so tough and can be molded into any shape or thickness, it’s even ideal for making quick repairs or modifications. An oven, microwave, hot air gun or simply hot water may be used for activation. With a low activation temperature of 150°-170° F (70° – 80° C, Wonderflex® has a long open time and can be hand-worked or laid up for two or three minutes.  Just reheat repeatedly as required for additional forming. It works beautifully with or without molds and cuts with a utility knife or scissors. It bonds to itself  well and can be adhered to most porous materials like paper, wood, fabric, foams and Fosshape®.

  • Standard 1 mm thickness (.039″)
  • One side with  SMOOTH construction for better coating or painting
  • $53.99 per sheet. 39″ x 59″ sheet size
Quantity

Price: $53.99

Loading Updating cart…

FOSSHAPE® 600

Fossshape 600

Often called the “buckram replacement”, this unique felt-like fabric (45″ wide or 114.3cm) is heat activated to achieve rigidity, stiffness and surface enhancement without the use of water, messy or hazardous additives. Synthetic FOSSHAPE® can easily be cut with scissors, will not fray like conventional woven fabrics and can be sewn to itself or other fabrics as a hidden stiffener or shaped into stand alone structures. Mildew resistant and dye-able as well. Fabric steamers are the often preferred method for forming a desired amount of rigidity and stiffness, but conventional steam irons or an industrial hot air gun may oftentimes be helpful. The level of stiffness and surface smoothness is achieved by adjusting heat, time and pressure. Designed for more rigorous use, the heavy duty FOSSHAPE 600 is heavier in weight and thicker than FOSSHAPE 300. A popular end-use for this product is mount making.

  • Standard weight of 18 oz/yd2 or 600 grs per sq/mtr at .200″ thickness
  • Price for 1 to 9 yards is $30.99 per linear yard
  • 45″(114.3cm) by  36″ (91.4 cm)= 1 linear yard
  • Buy 10+ linear yards and only pay $25.95 per yard
Quantity

Price: $30.99

Loading Updating cart…

FOSSHAPE® Black 400

The weight and thickness of this new offering is between the standard 300 and 600 FOSSHAPE grades. Sold in solid jet black only.

  • Standard weight of 12 oz per yard2 or 400 grs per sq/mtr at .135″ thickness
  • Price for 1 to 9 yards is $25.49 per linear yard
  • Buy 10+ linear yards and only pay $21.59 per yard
Quantity

Price: $25.49

Loading Updating cart…

FOSSHAPE® 300

14101568_10210647162554033_727312298_n

Often called the “buckram replacement”, this unique felt-like fabric (45″ wide or 114.3 cm) is heat activated to achieve rigidity, stiffness and surface enhancement without the use of water, messy or hazardous additives.  Synthetic FOSSHAPE® can easily be cut with scissors, will not fray like conventional woven fabrics and can be readily sewn to itself or other fabrics as a hidden stiffener or shaped into stand alone structures. Mildew resistant and dye-able as well. Fabric steamers are the often preferred method for forming a desired amount of rigidity and stiffness, but conventional steam irons or an industrial hot air gun may oftentimes be helpful. The level of stiffness is achieved by adjusting heat, time and pressure.  Applications include: costuming, lightweight crafted reinforcement, theater props and set design, craft-work, puppetry, millinery headpieces, masks, sculptures, museum mount making and more.  Versatile FOSSHAPE 300 is lighter in weight  and thinner than FOSSHAPE 600 for lighter weight needs and more intricate design efforts.  With heat and pressure from a steam iron, two layers of  the 300 grade can be combined or bonded to approximate one layer of FOSSHAPE 600.

  • Standard weight of 9 oz/yd2 or 300 grs per sq/mtr at 0.125″ thickness.
  • Price for 1 to 9 yards is $15.99 per linear yard
    (45″ x 36″= 1 yard or 114.3 cm x 91.44 cm= 1 yard)
  • Buy 10+ linear yards and only pay $13.29 per yard
Quantity

Price: $15.99

Loading Updating cart…
LoadingUpdating…